|
|
|
|
INN THE
PRESS
Custom Spring Steel exhibits
uniform hardness.
December 10, 2004 - Custom strip steel, produced via
computer-automated process control operation, is suited for use by
spring manufacturers and OEMs. It contains no soft spots, offering coil
to coil consistency, and is offered with choice of engineered tempering
solutions, finishing options, and other services for custom-enhanced
material structures. Product is packaged in flat ribbon coils up to 60
in. OD or compact, oscillating coil spools up to 2,000 lb.
|
 |
Custom Spring Steel Processor Creates
Manufacturing & Brand Value for Spring Manufacturers and OEMs
Custom Process Assures Uniform Hardness and Coil-to-Coil Consistency
--Enhancing Spring Performance and Reducing Time and Material Costs
Kenilworth, NJ: Custom strip steel processed by Blue Blade Steel Co.
provides spring manufacturers and their customers with brand-enhancing
extra value features that include product consistency, reliability,
outstanding spring performance and impressive production economies.
"Manufacturing strip steel in our computer-automated process control
operation, enables us to produce virtually flawless spring steel. Blue
Blade Steel features precision hardness consistency from coil to coil to
provide the spring manufacturer with quality steel that contains no soft
spots. There are simply no adjustments needed to be made between coils,
and there are no secondary setups needed to sort parts that are out of
tolerance since all the steel is manufactured to a consistent, uniform
specification," notes Blue Blade Steel President, Jerry Shaw.
With no soft spots in the coil, Blue Blade Steel eliminates a primary
cause of spring failure. In addition, production downtime that was
previously required to trim away substandard material and to replace the
coil-to-coil setup is eliminated. With no soft spots to cut away from
the continuous coil, material utilization is maximized and there is a
significant cost saving associated with reduced waste.
A wide choice of engineered tempering solutions, finishing options, and
value added services permits the spring manufacturer to order
custom-enhanced material structures and delivery setups to meet
production needs.
Blue Blade Steel spring steel is packaged in either traditional flat
ribbon coils up to 60" O.D. or in compact, production-efficient,
oscillating coil spools up to 2,000 lbs. that offer longer uninterrupted
production runs.
For more information, please contact Mr. Jeremiah Shaw; Blue Blade Steel
Company, 123 North 8th Street; Kenilworth, NJ 07033-0040; Tel: (908)
272-2620; Fax: (908) 272-8252;
www.bluebladesteel.com.
|
| |
|
| |
©1999-2006 Blue Blade Steel
123 North 8th Street PO Box 40, Kenilworth, NJ 07033-0040
USA
Tel. 908-272-2620 Fax: 908-272-8252
bbsales@bluebladesteel.com
|
|
